Remove/install trim at C-pillar

AR68.30-P-4490T

Remove/install trim at C-pillar

25.11.09

25.7.03

Work method changed

Operation steps 1.2, 11.1, 12.1,



Removing

1.1

Position both rear seat cushions upright

For vehicles with code (287a) Through-loading feature

 See Operator's Manual

1.2

Remove rear seat cushion

For vehicles without code (287a) Through-loading feature

AR91.12-P-1020T

2

Remove edge guard (2) in area of C-pillar paneling (1)

3

Remove belt end fitting (3)

4

Unclip C-pillar paneling (1) from clip (4)

5

Pull C-pillar paneling (1) approx. 2 to 3 cm toward front, slightly pivot in direction of center of vehicle and remove from C-pillar toward front

 Thereby pull seat belt (5) through passage out of C-pillar paneling (1)



Install

6

Insert sheet metal nut (6) into C-pillar paneling (1)

 Sheet metal nut (6) remains in C-pillar mount when C-pillar paneling (1) is removed

7

Pull seat belt (5) through passage in C-pillar paneling (1)

 Do not twist seat belt (5).

8

Insert C-pillar paneling (1) into rear shelf in guides (arrows)

 Thereby hold C-pillar paneling (1) pivoted slightly in direction of center of vehicle.

9

Clip C-pillar paneling (1) to C-pillar.

 Observe transition to headliner (7).

10

Install belt end fitting (3)

 Do not install seat belt (5) when twisted



*BA91.40-P-1012-01A

11.1

Install rear seat cushion

For vehicles without code (287a) Through-loading feature

AR91.12-P-1020T

11.2

Fold down both rear seat cushions and lock

For vehicles with code (287a) Through-loading feature

 See Operator's Manual

Number

Designation

Model
211.0

BA91.40-P-1012-01A

Bolt, belt end fitting to vehicle floor

Nm

32