P68.30-2036-09
1 Paneling (C-pillar)
2 Clips
3 Hook
7 Bolt
8 Belt end fitting
4 Tabs
5 Headliner
6 Wheel well paneling
| Remove/install | ||
1 | Detach edge guard in area of paneling parts (1 and 6) | ||
2 | Remove lumbar support control valve | ||
3 | Remove inner door sill molding | Door sill molding is screwed in area of lumbar support control valve (arrow) | |
4 | Remove wheel well paneling (6) | ||
5 | Pry paneling (1) out of C-pillar with clip nuts (2) | Press clip nuts out together with C-pillar paneling. | |
| |||
Guide hook (3) out at headliner (5) | |||
6 | Pull paneling (1) with catch lugs (4) out of rear shelf toward front | ||
7 | Remove screw (7) from belt end fitting (8) of rear seatbelt and pull belt out of paneling (1) | | |
8 | Install in the reverse order |
Seat belts/emergency tensioning retractors
Special tools
115 589 03 59 00
Long wedge