Remove/install paneling on C-pillar

AR68.30-P-4490GH

Remove/install paneling on C-pillar

3.3.97

 

Remove, Install

1.1

Remove third seat row

 Only with 3rd seat row, code 847. See operating instructions.

2

Remove safety net

 See Operating Instructions

3.1

Remove spare wheel cover

Only model 163.174.

AR68.30-P-4610GH

4

Remove rear roof frame paneling

 Do not unscrew screw for belt end fitting if present on 23rd seat row (omit step 1), if present. Loosen D-pillar paneling from C-pillar and guide to bottom along seat belt.

AR68.30-P-4470GH

 Long wedge

*115589035900

5

Remove door sill molding in load compartment

AR68.30-P-4100GI

6

Fold rear seat forward

 See Operating Instructions

7.1

Remove SRS label and unscrew screw behind

 Risk of fracturing!

 Only as of VIN A145273, X708319.

8

Remove screw (1) and spacer sleeve (3) from belt end fitting (2) of rear seat belt



*BA91.40-P-1001-01D

9

Remove brackets (4) (2 each.) from lining (8)

10

Open cover (5) and remove

11

Unscrew screw (6)

12

Unscrew screw (7)

13

Remove lining (8)

 As of VIN A145273, X708319 up to VIN A289564, X754619: two clips on inside of paneling in roof area.

 Installation: Check clips and replace if necessary. Properly insert height adjuster for seat belt into paneling. Check function Install paneling in edge molding of floor covering

 Long wedge

*115589035900

14

Pull seat belt out of lining

15

Remove lead from 12V socket

 At right paneling

16

Install in the reverse order

Number

Designation

Model 163 up to 08/99

Model 163 as of 09/99

BA91.40-P-1001-01D

Screw on belt end fitting

Nm

35

35