P68.30-0238-06
1 Headliner
4 Clip (rear dome lamp)
P68.30-0240-09
2 Headliner (tilting/sliding roof)
3 Rail
4 Clip (rear dome lamp)
7 Clip (tilting/sliding roof cutout, side)
8 Slide rail
9 Clip (rail)
10 Rail (headliner)
11 Bracket
| Remove/install | ||
1 | Open tilting/sliding roof | Electric tilting/sliding roof (Code 414a) | |
2 | Remove inside rearview mirror | ||
3 | Remove front dome lamp | ||
4 | Remove sun visors | ||
5 | Remove rear dome lamp | ||
6 | Remove edge guard from door cutout | ||
7 | Remove paneling from A-pillar | ||
8 | Remove paneling on B-pillar | Do not remove belt end fitting | |
9 | Remove paneling on C-pillar | Do not remove belt end fitting | |
10 | Fold down backrests of front seats | ||
11 | Position shift lever toward rear | ||
12 | Remove rail (3) | Electric tilting/sliding roof (Code 414a) Installation: Attach clip (9) using spatula so that the headliner is not damaged. | |
13 | Detach clip (4) in dome lamp cutout | ||
14 | Detach headliner (2) from front tilting/sliding roof frame | Electric tilting/sliding roof (Code 414a) | |
15 | Unhook clips (7) | Electric tilting/sliding roof (Code 414a) Unhook from tilting/sliding roof frame through slot in slide rail (8) using screwdriver. If the clips (7) cannot be unhooked: | |
Remove slide rail (8) | |||
16 | Unhook rail (10) on tilting/sliding roof frame towards front | Electric tilting/sliding roof (Code 414a) | |
17 | Remove headliner through right front door | ||
18 | Install in the reverse order | Attach bracket (11) |