Remove/install front floor covering (right)

AR68.20-P-2070RT

Remove/install front floor covering (right)

2.2.05

 

Remove/Install

1

Completely move right front seat toward rear

 See Operator's Manual

2

Remove door sill molding

AR68.30-P-4100RT

3

Remove paneling in footwell

AR68.30-P-4010RT

4

Unclip guide rail cover (1) and remove from guide rail toward front (arrow A).

 To unclip, guide suitable tool into opening in guide rail cover (1) (arrow B) and unclip guide rail cover (1).

5

Unclip guide rail cover (2) and remove from guide rail at side (arrow C).

 Long wedge

*115589035900

6

Pull floor covering (3) out below center console (4) (arrows D)

 Long wedge

*115589035900

7

Pull out floor covering (3) between front seat and center console below center console (arrows E) and pivot toward front.

8

Raise floor covering (3) on front seat (arrow F) and pull out of footwell (arrow G) toward rear.

 Installation: Ensure that front floor covering (3) is seated correctly below center console

9

Remove floor covering (3)

10

Install in the reverse order