Test and adjustment values for rear window
Number | Designation | Model 414 | ||
BE67.20-P-1001-01C | Gap between bottom edge of rear window | Dimension "A" | mm | 2.5...3.5 |
See picture | - | |||
Feeler gauge
129 589 03 21 00
L67.20-0001-01
1 Align the window edge of the rear wall window (1) at the side so that it lines up (arrows) with the rear-end door panel (2).
2 Press the rear wall window (1) as far as possible up against the rear-end door (2) until the rear wall window (1) makes contact with the rubber spacer disks.
Shown on vehicle with hatchback
1 Rear window
2 Rear-end door
L67.20-0002-01
3 Set dimension "A" and fasten the rear wall window (1) in place using strips of adhesive tape.
Dimension "A" between the rear wall window (1) and edge of the rear-end door panel (2).
Shown on vehicle with hatchback
1 Rear window
2 Rear-end door
3 Feeler gauge
A Interval between bottom edge of rear window and edge of rear-end door panel