Spot weld cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
L65.20-0070-06
1 Cut in area A and B.
L65.20-0077-09
Illustrated on right side of vehicle.
2 Expose spot welds in areas C and D and cut out.
3 Separate weld in area E with spherical cutter.
4 Perform coarse cut in area Y.
5 Remove section Z
6 Expose spot welds in areas F to K and cut out.
7 Carefully bend open flange on right side wall (arrows) and remove roof frame
8 Repeat steps two to five on left side of vehicle.
9 Align connection surfaces and grind down to bare metal in shaded areas. Sand spot weld flanges to bare metal on both sides Coat insides of spot weld flanges with zinc dust paint.
L65.20-0080-04
10 Grind connection surfaces down to bare metal in areas K to M and P to R.
11 In areas N, O, S and T grind only inside down to bare metal and coat with zinc dust paint (areas N, O, S and T riveted.)