P65.10-2908-06
1 Install side roof paneling (1), fit and fasten using vise grip pliers and C-clamps.
2 Position front roof frame (2) and mark holes for plug weldings in area A.
3 Position rear roof frame (3) and mark holes for plug weldings in area B.
4 Remove side roof paneling (1) and drill holes marked in areas A and B.
5 Install side roof paneling (1), fit and fasten using vise grip pliers and C-clamps.
P65.10-2909-09
6 Side roof paneling (1) in illustrated areas .
P65.10-2910-06
7 Side roof paneling (1) in area D .
8 Side roof paneling (1) and rear roof frame (3) .
9 Side roof paneling (1) below front roof frame (2) .
10 Grind spot welds down flat below front roof frame (2).
P65.10-2911-06
11 Position front roof frame (2)
12 Side roof paneling (1) and front roof frame (2) .
13 Side roof paneling (1) in other illustrated areas .
14 Side roof paneling (1) in illustrated areas .
P65.10-2912-03
P65.10-2913-09
15 Side roof paneling (1) in areas E to G .
Grind inert gas weld all the way through in areas E to G. Perform welding in intervals, allow to cool down in between. This ensures minimum heat distortion.
16 Grind inert gas welds down flat in areas E to G and clean with wire brush.
17 Grind all required spot welds down flat
18 Clean all other spot welds with wire brush
P65.10-2914-09
19 Fill unevenness in cross-hatched areas of side roof paneling (1) with filling solder and then grind down flat.