Install and weld in bottom rear center section

P64.20-3693-05

1 Fit rear center section (1) and fasten using vise grip pliers.

2 Rear center section (1) in illustrated area .

P64.20-3694-05

3 Rear center section (1) in areas A1 to B2 .

4 Rear center section (1) in areas C1 and C2 .

P64.20-3695-04

5 Rear center section (1) in illustrated areas, in trunk on left and right, .

P64.20-3696-06

6 Rear center section (1) in illustrated areas, in wheel well on left and right, .

P64.20-3697-05

7 Rear center section (1) in illustrated areas on left and right, .

8 Grind all spot welds down flat if required.

9 Clean all other weld joints with wire brush.