D64.10-1104-02
1 Push rear wall (1) at side to markings (2) into adjacent profiles (3).
2 Drill rivet holes at adjacent profiles (3) in rear wall (1).
Adjust drilling depth to 10 mm.
D64.10-1252-09
3 Set rivets (4)
4 Position bracket (5) at height of markings (6) on rear wall (1).
Only left rear wall (1).
5 Drill rivet holes on bracket (5) in rear wall (1) and set rivets (7).
Only left rear wall (1).
Adjust drilling depth to 10 mm.
6 Mask off rear wall (1) and caulk.
7 Remove visible adhesive residues and masking tape.