Commercially available tools
Number | Designation | |
WH58.30-Z-1002-02A | Hole punching pliers, dia. 7 mm | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.50-2462-09
1 Then grind connection surfaces to bare metal in shaded areas. Sand spot welding flanges to bare metal on both sides
2 Coat insides of spot welding flanges with zinc dust paint.
P63.50-2467-09
3 Fit rear fender.
4 Transfer cut hole from upper rear center section to rear fender (arrow).
5 Remove rear fender.
6 Punch 7 mm dia. hole.