Repair materials
Number | Designation | Order number |
BR00.45-Z-1092-02A | Adhesive kit, body, 2-component adhesive | A 009 989 36 71 |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
P63.50-2609-09
1 Mark separation point (area A).
Dimension x approx. 15 mm
2 Cut separation point with body saw (area A).
3 Sand connection surfaces down to bare metal in the cross-hatched areas.
Grind spot weld flanges down to bare metal on both sides.
4 Remove grinding and drilling chips using wet/dry vacuum cleaner.
5 Coat insides of spot weld flanges with zinc dust paint.
P63.50-2612-09
6 Sand connection surfaces down to bare metal in the cross-hatched areas.
Grind spot weld flanges down to bare metal on both sides.
7 Remove grinding and drilling chips using wet/dry vacuum cleaner.
8 Coat insides of spot weld flanges with zinc dust paint.
P63.50-2615-09
9 Drill dia. 3 mm holes (area N).
Dimension x1, approx. 160 mm
Dimension y, approx. 6 mm
Dimension z, approx. 150 mm
10 Grind connection surface down to bare metal on glue connection in cross-hatched areas (area N1).
Observe preliminary treatment of surfaces to be bonded.