Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
P63.30-2222-07
1 Expose and cut out spot welds in areas A to C on the longitudinal member outer shell (1).
The spot welds in areas A to C can be cut out when removing the side wall paneling or when removing the A-pillar.
P63.30-2223-08
2 Expose and cut out spot welds in areas D to G on the longitudinal member outer shell (1).
The spot welds in area D can be cut out when removing the A-pillar.
3 Pull longitudinal member outer shell (1) toward front below side wall reinforcement (2) and remove.