P63.30-2417-09
1 Install center side longitudinal member (1), fit and fasten to straightening tool.
2 Fasten center side longitudinal member (1) to body using vise grip pliers and C-clamps.
3 Center side longitudinal member (1) in areas A and B
P63.30-2416-06
4 Center side longitudinal member (1) in areas C to E .
5 Grind all required spot welds down flat
6 Clean all other spot welds with wire brush
P63.30-2415-06
7 Install center side longitudinal member reinforcement (2), fit and fasten to center side longitudinal member (1) using vise grip pliers and C-clamps.
8 Center side longitudinal member reinforcement (2) in areas F and G .
9 Grind all required spot welds down flat
10 Clean all other spot welds with wire brush