Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
L61.25-0023-01
1 Weld longitudinal member in area of cross member (17) from cargo space side (arrows), .
L61.25-0021-01
2 Weld longitudinal member in area of wheel flange (16) from cargo space side (arrow), .
L61.25-0022-01
3 Weld longitudinal member in area of C-pillar (14) from cargo space side (arrow), .
L61.25-0026-01
4 Weld longitudinal member in area of wheel flange (16) from cargo space side (arrow), .
L61.25-0020-01
5 Weld longitudinal member in area of console (15) (arrows), .
L61.25-0019-01
6 Weld longitudinal member in area of C-pillar (14) (arrows), .
L61.25-0025-01
Only models 667.353, 668.353, 670.353
7.1 Align pillar (18) and weld (arrows), .
L61.25-0024-01
Only models 667.353, 668.353, 670.353
8.1 Align reinforcement (3) and weld (arrows), .
L61.25-0034-01
Right side of vehicle only
9.1 Position holder (5) at distance a (measured from edge of (29)) on longitudinal member (4) and mark contour on longitudinal member.
Dimension: a = 135 mm
10.1 Grind longitudinal member down to bare metal in marked area and coat with zinc dust paint.
11.1 Position holder (5) on longitudinal member (4). (See step 9.1)
12.1 Weld holder (5) onto longitudinal member (4) (arrow), .