Preparing outer sliding door entry for welding in

Workshop equipment

Repair materials

D63.30-0003-06

1 Mark holes at rear outer sliding door entry with the following dimensions:

a = 10 mm

b = 20 mm

c = 17 mm

d = 27 mm

e = 95 mm

f = 17 mm

g = 35 mm

h = 7 mm

i = 27 mm

D63.30-0004-06

2 Mark holes at front outer sliding door entry (1) with the following dimensions:

a = 12 mm

b = 30 mm

c = 52 mm

d = 9 mm

e = 15 mm

f = 15 mm

g = 40 mm

h = 60 mm

3 Drill all marked holes with  6 mm dia. bit.

4 Grind outer sliding door entry (1) down to bare metal on both sides in area of drilled holes and coat with zinc dust paint.

D63.30-0005-10

5 Grind outer sliding door entry (1) down to bare metal on both sides in marked area (4) and coat with zinc dust paint.

6 Fit outer sliding door entry (1), align and clamp.