201 589 00 51 00
Spot weld cutter
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
D62.20-0002-06
1 Mark separation line (2) on door frame paneling (4) at a distance of a = 35 mm measured from center of hole (3) and in center of ridge (arrow)
2 Mark separation line (5) on door frame paneling (4) at a distance of b = 120 mm measured from edge (arrow).
3 Expose spot welds (arrows) and cut out.
Cutting depth in area of spot welds maximum 1 mm.
4 Separate door frame paneling (3) along marked separation lines (2 and 5).
D62.20-0003-04
5 Expose spot welds (arrows) and cut out.
D62.20-0004-12
6 Expose spot welds (arrows) and cut out.
7 Remove front wheelhouse paneling section (1)