1 Fit rear lamp reinforcement (1) and fasten to body using vise grip pliers and C-clamps.
2 In areas A and B on rear lamp reinforcement (1) .
3 In area C on rear lamp reinforcement (1) .
P63.20-5280-03
4 In area D on rear lamp reinforcement (1) .
5 Drill through available holes with 4 mm drill in areas E to G.
6 In areas E to H on rear lamp reinforcement (1) .
7 Grind all spot welds down flat if required.
8 Clean all other spot welds with wire brush
P63.20-5281-03