Commercially available tools
Number | Designation | |
WH58.30-Z-1003-02A | Clamping pliers | |
WH58.30-Z-1031-02A | C-clamp | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
P63.20-5042-06
1 Fit side wall reinforcement (1) and fasten with clamping pliers.
2 In areas A and B on side wall reinforcement (1) .
P63.20-5043-06
3 In area C on side wall reinforcement (1) .
Complete other spot welds required together with side wall panelin.
4 Grind all spot welds down flat, if required.
5 Clean all other spot welds with wire brush.