Spot weld milling cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
WE58.40-Z-1001-05A | Two-post lifting platform |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
L63.20-0043-04
1 Grind down spot welds flat in areas
A through C and cut out.
2 Cut out welds in area D with spherical cutter.
3 Remove taillamp reinforcement.
4 Grind connection surfaces down to bare metal on one side only in area D.
5 Align connection surfaces and grind down to bare metal in shaded areas. Sand spot weld flanges to bare metal on both sides Coat insides of spot weld flanges with zinc dust paint.
L63.20-0046-04
6 Grind down to bare metal on inside only in area E and coat with zinc dust paint.