Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
L63.20-0037-02
1 Adapt size of pillars in vehicle, shorten if necessary.
2 Bore a hole in the center of each section (4 and 5) to a diameter of 10 mm (6 and 7).
3 Sand pillars in area of side bores (arrows) and the bored holes down to bare metal on both sides.
4 Coat sanded down area of pillar with zinc dust paint.