Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
D61.10-0011-06
1 Mark separation line (9) at a distance of c=105 mm on both sides of frame longitudinal member (3) measured from jack socket (5).
2 Separate frame longitudinal member (3) section along separation line (9).
D61.10-0012-06
3 Separate stay (10) of section (1) to a length of d = 55 mm.
4 Mark line (11) at a distance of e=55 mm on all three sides of the section (1) measured from the outer edge.
5 Mark separation lines (12) at a
length of f = 55 mm in both section roundings (1).
6 Cut section (1) at a cutting depth of approx. 2 mm along separation lines.
7 Taper areas (13, 14 and 15) of
section (1) until it can be inserted into the remaining sheet metal of the longitudinal frame member on the vehicle
8 Grind off areas (13, 14 and 15) and coat with zinc dust paint.