Separate front floor in cab up to firewall

201 589 00 51 00

Spot weld cutter

Workshop equipment

D61.10-0137-12

1 Mark separation line (dotted line, 6) in center of front floor (1).

2 Mark separation lines (7, 19 and 20) with the following dimensions:

a = 490 mm,

b = 240 mm,

c = 90 mm measured from outer edge of cutout (arrow).

D61.10-0138-06

3 Expose spot welds in area (B) of front floor (1) and cut out.

4 Expose spot welds in area (C) of front floor (1) and grind.

D61.10-0139-12

5 Expose all spot welds of front floor (1) in shaded area up to separation lines (dotted lines 6, 7, 19 and 20) and cut out.

D61.10-0140-06

6 Mark separation line (8) along bracket (9) on front floor (1).

Cutting depth in area of cross braces (10), of reinforcement bracket (9) and along separation line (20) should be max. 1 mm.

7 Separate front floor (1) along separation lines (6, 7, 8, 19 and 20).

D61.10-0086-01

8 Expose spot welds on firewall in area (D) and cut out.