Workshop equipment
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
L62.20-0005-01
Cut end tip off of floor replacement part at front.
When installing new part the overlap for the old and new part should be minimum 20 mm. When marking the separation line (7) observe overlap.
1 Mark required size for end tip on front floor (6).
2 Cut end tip (1) off along marked separation line (7).
L62.20-0006-01
3 Punch 6 mm dia. holes (arrows) in areas (8, 9 and 10) 0) of end tip (1).
4 Punch 6 mm dia. hole (12) in area (11)
5 Grind end tip down to bare metal on both sides in area of all punched holes and in area of holes (13).
6 Coat bare sheet metal areas with zinc dust paint.