ar6000w208002a

Cut out damaged point

Тип ar · тема 60.00 · версия 0102 · 2009-11-19

Применимость: MODEL 957 with BODY 957.810

Нет на языке «ru»; показано на языке Английский.

Расположение

Функциональная группа 3 Кузов › 60 Кузов: общие сведения › 60.00 Общие сведения — Серия 957

EinPAS 35 Кузов / рама / навесные детали › 35.20 Кабина водителя / кузов › 35.20.30 Кабина водителя — Серия 957

EinPAS 35 Кузов / рама / навесные детали › 35.20 Кабина водителя / кузов › 35.20.40 Остов кузова — Серия 957

AR60.00-W-2080-02A

Cut out damaged point

Repair materials

Number

Designation

Order number

BR00.45-Z-1027-04A

Teroson FL surface preparation 1 l
IDH Nr. 92679

Henkel AG & Co. KGaA
Gutenbergstraße 3
85748 Garching
Deutschland
Tel. +49 89 9268-0
Fax +49 89 9107890
www.Loctite.de

Cut out damaged point

G60.00-3017-10

1 Cut out damaged point with cutting disk or jig saw

Completely remove damaged laminate, i.e. cracks or defects should not remain in the component.

2 Overlap.

This is only possible at points with double-layer structure. The outer structure (1) is cut further than the inner (2) to reach a higher strength by overlapping the repair point.

Cut out damaged point

G60.00-3018-10

3 Rework surfaces of areas (3) to be bonded with grinding material (grain size 60) and finish with grinding material (grain size 400).

Immediately evacuate grinding dust occurring. Remove remaining dust and dirt residues with cleaner.