1 | Extraction hook |
2 | Assembly support |
3 | Perceptible stop |
P1 | MTCO Tachograph |
B54.61-1100-06
4 | Seal |
5 | MTCO Rear cover |
B54.61-1101-01
6 | Connector D (brown) |
7 | Conjugated connectors A and B (black) |
B54.61-1105-10
| Remove | ||
1 | Insert the two extraction hooks (1) in the side openings of the MTCO tachograph (P1) until the perceptible stop (3) | The openings are located between the side of the drawer and the frame. | |
2 | Pull the MTCO tachograph (P1) with the extraction hooks (1) out of the housing | ||
3 | Remove the MTCO rear cover (5) from the connectors breaking the seal (4) | This operation must be carried out carefully to avoid breaking the locks. | |
4 | Remove the conjugated connectors (7) and the connector (6) | The mounting bracket (2) is interchangeable and is not required to be removed. |