Removing and installing steering wheel

AR46.10-D-0100B

Removing and installing steering wheel

17.10.11

26.11.02

Value changed from 80 Nm to 70 Nm

Value changed in BA46.10-N-1004-05C for
model 901, 902, 903, 904, 905

*BA46.10-N-1004-05C

 

Remove/install

 Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag unit with deployment face up, do not subject to temperatures above
100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A



Notes on disposing of airbag and emergency tensioning retractor units

OS91.00-P-0001-01A

1

Disconnect ground cable from battery

2

Remove airbag unit from steering wheel

AR91.60-D-0660A

3

Turn steering wheel (3) into middle position and latch steering wheel lock into place

 Wheels must be in straight-ahead position

4

Detach connectors from horn contact

5

Unscrew screw (4)

 Installation: use new screw



*BA46.10-N-1004-05C

6

Pull steering wheel (2) off steering column

7

Install in the reverse order

8

Set time on instrument cluster

9

Set time on timer for auxiliary heater

with code H12, Warm water auxiliary heater or H86, Timer for auxiliary heater.

10

Code radio

11

Perform road test to check the position of the steering wheel

Number

Designation

Model
901, 902, 903, 904, 905

BA46.10-N-1004-05C

Screw for steering wheel with airbag on steering shaft

Nm

70