ar4010p104002a

Balancing on vehicles with 4MATIC

Тип ar · тема 40.10 · версия 0102 · 2000-10-04

Применимость: MODEL 124.2 /3

Нет на языке «ru»; показано на языке Английский.

Расположение

Функциональная группа 2 Ходовая часть › 40 Колёса, измерение углов установки колёс › 40.10 Колёса, шины — Серия 124 (модели 2**, 3**)

EinPAS 20 Ходовая часть › 20.30 Колесо / шина › 20.30.30 Колесо / шина / запасное колесо — Серия 124 (модели 2**, 3**)

AR40.10-P-1040-02A

Balancing on vehicles with 4MATIC

Balancing on vehicles with 4MATIC

P40.10-0210-01

Front axle

1 Raise vehicle at the front axle and support control arms with measuring trestles.

2 Raise vehicle at the rear axle and support at the sides with trestles.

3 Drive the front wheels with the engine (120-140 km/h).

Rear axle

1 Raise vehicle at the front axle and support with trestles.

2 Raise vehicle at the rear axle and support spring links with measuring trestles.

3 Drive the rear wheels with the engine (120-140 km/h).

If the front axle is not raised, switch off the 4MATIC system by moving the service valve (test position A) or by moving the changeover switch to the "Test" position.

Balancing on vehicles with 4MATIC

P40.10-0211-01