AR28.50-D-1000-03A | Disassembling front axle output shaft | Models 903.0/4, 904.0/4 with code ZG1 Models 903.0/4, 904.0/4 with code ZG3 |
387 589 02 34 00
Clamping pliers
Puller
001 589 50 33 00
D28.50-0037-03
1 Screw two propellor shaft bolts into the flange (15).
2 Clamp front axle output shaft (42) with flange (15) in vise.
3 Unlock and unscrew collared nut (35).
4 Pull off tapered roller bearing (37) using puller and clamping pliers
5 Remove thrust washer (38).
6 Remove output gear (39), needle bearings (40,41) and shift sleeve (43).
7 Remove front axle output shaft (42) from flange (15).
D28.50-0038-03
D28.50-0003-01
8 Pull tapered roller bearing (44) off front axle output shaft (42) using puller and clamping pliers.