Remove/install shift actuator

AR26.60-P-0040FF

16.2.04

TRANSMISSION 717.474 /475 in MODEL 454.0

P27.60-2567-06

1 Shift actuator

2 Bolts

3 Connector

Modification notes

25.10.04

Place shift actuator in neutral using STAR-DIAGNOSIS added

Step 1

 	Remove/Install
1	Place shift actuator (1) in neutral using STAR-DIAGNOSIS
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04FF
		STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A
2	Remove paneling from center section in front of windshield		AR88.00-P-2792FF
3	Remove battery tray		AR54.00-P-0002FF
4	Detach plugs (3) on left and right on shift actuator (1) and place wiring harness to one side.	 Installation: Ensure plugs (3) snap into place on left and right on shift actuator (1).
5	Unscrew bolts (2)	 Installation: Turn in screws (2) uniformly up to contact surface and then tighten.
			*BA26.60-P-1003-01E
6	Take shift actuator (1) out of the transmission housing	 Installation: Clean the sealing surface and apply a thin coating of sealing compound.	*BR00.45-Z-1053-01A
7	Install in the reverse order
8	Teach in shift actuator (1), gear position and clutch motor with drag point
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04FF
		STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A

 Shift mechanism

Number	Designation		Trans-missions 717.474/ 475


BA26.60-P-1003-01E	Bolt, shift actuator to transmission	Nm	20

Commercially available tools

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnosis system, Compact Passenger Car	6511 1801 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1053-01A	Sealing compound	Q0000282V000000000