Remove/install reverse gear wheel

AR26.50-P-0460FF

Remove/install reverse gear wheel

21.1.08

 

Remove/install

1

Remove front section of transmission housing

AR26.40-P-2470FF

2

Remove differential (7) from rear section of transmission housing (4) and place to one side

3

Remove screw (5) of shaft (2)



*BA26.50-P-1001-01E

4

Pull shaft (2) out of gear wheel for reverse gear (1)

5

Route gear wheel for reverse gear (1) out of the shift fork (3) and remove from the rear section of the transmission housing (4)

 Installation: Ensure that the reverse gear wheel (1) is seated correctly

6

Remove guide (6) from rear section of transmission housing (4)

 Installation: Prior to installation, clean and apply light coating of oil to gear wheel for reverse gear (1), shaft (2) and guide (6).



Checking

7

Check gear wheel for reverse gear (1), shaft (2) and guide (6) for signs of damage and wear, replace if necessary

 If a gear for the reverse gear (1) is damaged or broken then it must be replaced together with the gear wheels it engages with.

Refer to: 

Disassembling and assembling output shaft

AR26.50-P-0419FF

Dismantle, assemble drive shaft.

AR26.50-P-4744FF

8

Install in the reverse order

Number

Designation

Transmission
717.4

BA26.50-P-1001-01E

Bolt securing reverse gear shaft

Nm

15