203 589 01 31 00
Extractor
711 589 01 33 00
Extractor
D26.40-0001-01
1 Unscrew the extractor disassembling screw so that when installing the extractor there is no contact with the primary shaft.
Use the extractor 203 589 01 31 00 for gearbox 711.620/ 622
Use the extractor 711 589 01 33 00 for gearbox 711.612
2 Slightly unscrew the adjusting screws.
3 Slide the extractor on the primary shaft and fit it in the same shafts radial seal , beating slightly with a hammer.
4 Expand the extractor and remove the disassembling screw.