S07.10-2001-05
1 Injection pump
2 Nut
3 Fastening staple
4 Injection pipe
5 Injector
| Removing and installing | ||
1 | Remove the fastening staple (3) | Installation: To prevent breakages of pipes, fit the fastening staples again, as indicated in the drawing. | |
2 | Unscrew nuts (2) in the injection pump (1) and in the injectors (5) | | |
| |||
3 | Remove the injection pipes (4) | Pay attention not to deform the injection pipes | |
4 | The installation is carried out in reverse order | ||
5 | Check leaktightness |
Injection system. Diesel in general.
Number | Designation | Engine 601.942 601.970 | |
BA07.11-N-1002-01A | Injection pipes in the injectors/injection pumps | Nm | 18 |
000 589 77 03 00
Box wrench socket