Renew the front radial retainer of the crankshaft

AR03.20-S-3000B

22.6.95

ENGINE 601 in MODEL 638

S03.20-2000-09

1 Ribbed pulley / vibration damper

2 Middle screw

3 Washer

4 Radial retainer of the crankshaft

5  Bushing (series state)

6  Bushing (repair position)

7  Locking device

	Removing
1	Remove the ribbed pulley / vibration damper	 Check the ballrace of the bushing for running impressions	AR03.30-S-1600B
2	With the aid of a screwdriver, push the radial retainer of the crankshaft (2) outwards	 Pay attention not to damage the crankshaft and the hole which houses the radial retainer of the crankshaft (2). Use a clean cloth as support.
	Assembly
3	Install the front radial retainer of the crankshaft.	 If a running impression is noticed, install a radial retainer of the crankshaft (4) in repair position	AR03.20-S-3000-01B
			*601589031400
			*606589001400
4	Install the ribbed pulley / vibration damper (1)		AR03.30-S-1600B
5	Complete the vehicle
6	Check the waterproofness	 Check the oilproofness, previously apply contrast spray in surrounding area, clean and dry.
			*BR00.45-Z-1001-03A

601 589 03 14 00

606 589 00 14 00

Sleeve

Bushing

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-03A	Crack detector	A 000 989 03 59