PEC fuel injection and ignition system test of electrical system transmission protection

AD07.52-S-6000-27A

 	Scope of test	Measuring instrument/ Test connection			Operation/Requirement	Specified value	 Possible cause/Remedy

1.0  	Transmission protection   –, transmission protection too long –//–,   +				Ignition: ON DTC memory The PEC control module must be programmed correctly AD07.52-S-2000-04A		Check whether automatic transmission fault lamp illuminates If "YES": AD27.19-S-1001AZ If "NO":  1.1
1.1	Cable insulation resistance   +	 19  (2.2)			Ignition: ON Test coupling 2 disconnected at control module and coupling A4.1 disconnected at automatic transmission control module	< 1 V	 Cable Value in order:  1.2
1.2	Cable insulation resistance   -	 19  (2.2)			Ignition: OFF Test coupling 2 disconnected at control module and coupling A4.1 disconnected at automatic transmission control module	> 30 kΩ	 Cable Value in order:  1.3
1.3	Cable continuity	A13.2 2		A4.1 38	Ignition: OFF Coupling "2" disconnected at PEC control module and coupling disconnected at automatic transmission control module	< 5 Ω	 Connector X97  Cable