sm8370p000401b

Retrofitting fuel line

Tip sm · temă 83.70 · versiune 0101 · 2003-06-18

Valabil pentru: MODEL 463 with ENGINE 112.945, 113.962 Radstand 2400

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 83 Climatizare › 83.70 Încălzire staţionară, încălzire suplimentară, încălzitor auxiliar — Seria 463

EinPAS 39 Încălzire/Aerisire/Răcire › 39.25 Încălzire staţionară/Încălzire suplimentară › 39.25.3 Montare ulterioară/Modificare — Seria 463

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.40 Măsuri de service — Seria 463

Valabil și pentru motoare/cutii de viteze: 112 945, 113 962

SM83.70-P-0004-01B

Retrofitting fuel line

Model 463 with ENGINES 112.945, 113.962 with CODE (H12) auxiliary heater

Wheelbase 2400

Retrofitting fuel line

P83.70-3125-01

1 Position cable fastener with hose bracket (9) on cross member, rear right.

Retrofitting fuel line

P83.70-3082-01

2 Bore out bracket (10) to 6 mm and place on mount (arrow) from heat shield of exhaust system.

3 Secure fuel line with rubber mount in clamp (11).

Retrofitting fuel line

P83.70-3083-01

4 Place hose bracket with clamp (12) on hand brake cable protection hose.

Retrofitting fuel line
Retrofitting fuel line

P83.70-3085-01

5 Detach mat holders and replace with clamps (14, 15 and 16) with washers.

6 Install fuel line (8) from rear, along underfloor to the front and between firewall and heat shield to heater unit (A6).

P83.70-3086-01

Retrofitting fuel line

P83.70-3087-01

Retrofitting fuel line

P83.70-3088-01

7 Connect fuel line with hose (18) on heater unit (A6) and secure with hose bracket with clamp (17) to pipe line.

Retrofitting fuel line

P83.70-3125-01

8 Fit fuel line (6) from fuel metering pump to fuel line (8).

Do not shorten fuel line (8), instead make a loop with excess length and secure on tubular frame cross member.