Valabil pentru: Model 964 with engine 470.9 German Armed Forces vehicles with code JMAB (Preparation for low-quality fuel package)
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 0 Total › 00 Autovehicul în ansamblu › 00.10 Autovehicul complet, date tehnice, verificări legale — Seria 470 (modele 9**) · Seria 964
EinPAS 15 Motor › 15.40 Instalaţie gaze arse/purificare a gazelor arse › 15.40.1 Informaţie de bază — Seria 470 (modele 9**) · Seria 964
EinPAS 16 Motor alimentare carburant/Motor alimentare energie › 16.10 Alimentare cu combustibil › 16.10.1 Informaţie de bază — Seria 470 (modele 9**) · Seria 964
German Armed Forces vehicles with code JMAB (Preparation for low-quality fuel package)
Exhaust aftertreatment, BlueTec®
Number
Designation
Engine 470.9, 471.9, 473.9
BA14.40-N-1015-02I
Pump module on bracket
Nm
60
1
Remove AdBlue® pump module (A80) from holder (1).
Do not disconnect electric line (3), AdBlue® lines (4) or coolant lines (2).
2
Remove previous holder (1) from frame.
W49.20-A206-81
3
Attach new holder (5) at frame.
Install new holder (5) offset by a row of holes in direction of travel and so that it points toward vehicle center.
4
Attach AdBlue® pump module (A80) at holder (5) .
All lines remain connected to AdBlue® pump module (A80).
W49.20-A207-81
5
Seal AdBlue® lines (7) of AdBlue® metering device remaining on vehicle after removal of exhaust gas aftertreatment unit using line pieces (8) and (10) as well as connection pieces (9).
W49.20-A208-81
6
Place line package on other side of vehicle and secure at AdBlue® container (11) or frame using cable ties.
Ensure that line package is securely fastened and routed free of tension.
7
Protect plug of electric line (6) against soiling with end cap (12).
W49.20-A209-81
Documente menționate
ah0000n500001h Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor
străine
