si8285w0039a

Service Information: Retrofit code J3S (Truck Data Center 6 (DTCO))

Tip si · temă 82.85 · versiune 0200 · 2019-01-10

Valabil pentru: Model 963, 964 Model 967

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.85 Sisteme de navigaţie şi comunicaţie (CNS, ICS, COMAND, FleetBoard) — Seria 963 · Seria 964 · Seria 967

EinPAS 31 Comunicaţie/Informaţie/Entertainment › 31.20 Sistem management flotă autovehicule/Localizare › 31.20.3 Montare ulterioară/Modificare — Seria 963 · Seria 964 · Seria 967

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 963 · Seria 964 · Seria 967

SI82.85-W-0039A

Service Information: Retrofit code J3S (Truck Data Center 6 (DTCO))

04.01.2019

Model

963, 964

Model

967

Modification notes

11.12.2018

Data storage medium (purchase order with vehicle identification number (VIN) and "code J3S" in the additional field), added.

Parts ordering note

Retrofitting of code J3S (Truck Data Center 6 (DTCO))

A chargeable retrofitting of code J3S (Truck Data Center 6 (DTCO)) is available.

Code J9N (Pre-installation for Truck Data Center 6 (DTCO)) must be installed for retrofitting, otherwise it is not possible to carry out a retrofit. XSF ticket queries for retrofitting of code J3S (Truck Data Center 6 (DTCO)) in vehicles without code J9N (Pre-installation for Truck Data Center 6 (DTCO)) will be rejected.

Preconditions

XENTRY must be online.

The latest version of XENTRY must be installed.

The order process in the GLC must have been completed (this is the case once the data storage medium is received).

The vehicle must have code J9N (Pre-installation for Truck Data Center 6 (DTCO)).

Procedure

Order the desired part number by entering the vehicle identification number (FIN) and the "J3S code" in the additional field in GLC.

The GLC adds code J3S (Truck Data Center 6 (DTCO)) to the equipment list of the vehicle in VeDoc and delivers a data storage medium with the parameter set.

Carry out parameterization of affected control units for retrofitting of code J3S (Truck Data Center 6 (DTCO)) with XENTRY (after receiving data storage medium).

Parts ordering note

Part no.

Designation

Quantity

A 960 446 10 60

Common-Telematics Platform (CTP) parts kit, model 963, 964

1

A 960 446 04 60

Common-Telematics Platform (CTP) parts kit, model 967

1

A 000 827 75 59

Data storage medium (purchase order with vehicle identification number (VIN) and "code J3S" in the additional field)

1

Retrofit Common Telematics Platform (CTP) control unit

Model 963, 964 with code J9N (Pre-installation for Truck Data Center 6 (DTCO))

AN82.85-W-0108F

Model 967 with code J9N (Pre-installation for Truck Data Center 6 (DTCO))

AN82.85-W-0108G

Documente menționate