si8230p0005a

Service Information: Exchange of rain/light sensor (RLS)

Tip si · temă 82.30 · versiune 0100 · 2004-09-16

Valabil pentru: MODELS 203 as of 1.6.03, 209, 211, 215, 220 with CODE (345) Rain sensor

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.30 Ştergător parbriz — Seria 203 · Seria 209 · Seria 211 · Seria 215 · Seria 220

EinPAS 30 Instalaţie de iluminat › 30.15 Sistem de iluminare exterior › 30.15.12 Senzor/Comutator/Cablaj — Seria 203 · Seria 209 · Seria 211 · Seria 215 · Seria 220

EinPAS 36 Vizibilitate › 36.30 Ştergere/Spălare › 36.30.12 Senzor/Comutator/Cablaj — Seria 203 · Seria 209 · Seria 211 · Seria 215 · Seria 220

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 203 · Seria 209 · Seria 211 · Seria 215 · Seria 220

SI82.30-P-0005A

Service Information: Exchange of rain/light sensor (RLS)

8.6.04

MODELS 203 as of 1.6.03,
209, 211, 215, 220 with CODE (345) Rain sensor

Service Information: Exchange of rain/light sensor (RLS)

P82.30-2406-06

1 Resistor

Arrows Retaining clip

In examining exchanged and newly installed rain/light sensors (RLS) it has become apparent that the mounting brackets (clips) have been loose and that the RLS has not been coded properly.

Due to faulty assembly (clipping in place) or incorrect coding of the RLS, correct function cannot be ensured if the brackets (clips) are loose. The RLS does not function correctly, failing to work at all or reacting in an implausible manner.

When installing and/or removing the RLS, make sure that the resistor (1) on the inner side of the sensor does not become pressed inward or damaged.

When installing the RLS, make sure that all 4 retaining clips (arrows) audibly engage on the sensor.

After the RLS has been exchanged, a windshield adaptation procedure (coding) must be performed with STAR DIAGNOSIS.