si8000p0003a

Service information on disabling and enabling keys/key rails

Tip si · temă 80.00 · versiune 0100 · 2003-06-18

Valabil pentru: MODEL 220

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 80 Închidere centralizată, comandă confort, sisteme de autorizare a pornirii › 80.00 Generalităţi — Seria 220

EinPAS 29 Sistem autorizare pornire/Sistem de siguranță › 29.16 Blocare/deblocare › 29.16.14 Emiţător/receptor — Seria 220

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 220

SI80.00-P-0003A

Service information on disabling and enabling keys/key rails

17.12.98

MODEL 220

Revisions

17.12.98

Replaces STIP no. 80.30-027 dated 27.11.98

On model 220 there are a few changes in disabling and enabling the key rails.

Disabling keys/key rails

1

Activate EIS

2.1

Disable key with green workshop key.

Key rail is disabled in EIS only

2.2

Disable key with STAR DIAGNOSIS.

Case a) Key in position "Ignition ON": key rail is disabled in all DAS 3 components (EIS and ESM).

Case b) Key not in position "Ignition ON": key rail is disabled in EIS only.

Reenabling keys/key rails.

1

Program green workshop key.

2

Connect STAR DIAGNOSIS to vehicle.

3

Actuate vehicle with "Ignition ON" via STAR DIAGNOSIS.

Only after vehicle is actuated with "Ignition ON"

4

Insert green workshop key into EIS

Data is transferred from the workshop key to the vehicle

Only when red LED is "OFF"

5

Remove workshop key

6

Insert reenabled key into EIS and turn to position "Ignition ON"

Wait until ESM has released the shift lever (press brake pedal).

Reenabling with STAR DIAGNOSIS possible only as of version 12/98

If the key is disabled in the EIS only, STAR DIAGNOSIS is not required for reenabling.

Disabling of the key rail in the ESM can be checked with STAR DIAGNOSIS.

The ignition can be switched "ON" with STAR DIAGNOSIS with menu guidance (model/body/control modules/EIS/control module adaptations/switch on ignition).