si6010p0003a

Service Information: Reworking the straightening tool 12 and 13 from set 7221.300

Tip si · temă 60.10 · versiune 0100 · 2006-03-14

Valabil pentru: MODEL 216, 221

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 60 Structură generalităţi › 60.10 Stand de îndreptat şasiuri, set corecţie unghiulară — Seria 216 · Seria 221

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.15 Măsurare/Banc aliniere › 35.15.30 Banc aliniere — Seria 216 · Seria 221

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 216 · Seria 221

SI60.10-P-0003A

Service Information: Reworking the straightening tool 12 and 13 from set 7221.300

10.3.06

MODEL 216, 221

Service Information: Reworking the straightening tool 12 and 13 from set 7221.300

P60.10-2182-06

Picture 1

Arrow Interference points

Service Information: Reworking the straightening tool 12 and 13 from set 7221.300

P60.10-2183-11

Picture 2

A 10 mm

Arrow: Area for reworking

Due to tolerance additions of the body and straightening tool, both components can be contacted at the point in question (see picture 1).

This interference point can be reworked mechanically if required. To do this the mating surfaces (4 pieces) in the interference area should be adapted outwards in the y-direction approx. 5 to 10 mm (see picture 2).