si6000n0001a

Service information: Measuring and straightening systems

Tip si · temă 60.00 · versiune 0100 · 2019-02-01

Valabil pentru: Model 463 as of model year 2019 Model 470, 471 Model 907, 910

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 60 Structură generalităţi › 60.00 Generalităţi — Seria 463 · Seria 470 · Seria 471 · Seria 907 · Seria 910

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.15 Măsurare/Banc aliniere › 35.15.20 Efectuare geometrie șasiu/Geometrie șasiu — Seria 463 · Seria 470 · Seria 471 · Seria 907 · Seria 910

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 463 · Seria 470 · Seria 471 · Seria 907 · Seria 910

SI60.00-N-0001A

Service information: Measuring and straightening systems

29.01.2019

Model

463

as of model year 2019

Model

470, 471

Model

907, 910

Service information: Measuring and straightening systems

N60.00-A000-81

We would hereby like to notify you that, after a successful trial of the above-mentioned model series of the light vans and off-road vehicles category, the following products from the straightening system manufacturer CAR­O­LINER are available:

Straightening bench BenchRack 5500/vision X3/MB adapter EVO system

Straightening bench BenchRack 6300/vision X3/MB adapter EVO system

The associated data sheets for each model series are to be ordered directly from the manufacturer.

The straightening bench BenchRanck 6300 must be used for the light van category (model 907) with long wheelbase.

Further information on the trialled and recommended products from each straightening system manufacturer for Mercedes-Benz vehicles of all categories can be found in the XENTRY Portal parts information under the workshop equipment tab.