si5820w0004b

Service Information: Special tool modification

Tip si · temă 58.20 · versiune 0100 · 2005-01-18

Valabil pentru: MODEL all

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 0 Total › 58 Scule › 58.20 Scule speciale — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 45 Date/Informaţie › 45.10 Întregul autovehicul › 45.10.20 Întregul autovehicul — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

Valabil și pentru motoare/cutii de viteze: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI58.20-W-0004B

Service Information: Special tool modification

14.1.05

MODEL all

Due to a change in the construction of cassette-type seals in coolant pumps, and before they can be installed, the inside diameter (A) of the drifts 352 589 08 15 00 must be checked.

If the inside diameter (A) is smaller than 32.5 mm, it must be increased to 32.5 mm or a new drift 352 589 08 15 00 must be ordered.

GLC in Germersheim will only supply the new drifts.

Service Information: Special tool modification

W58.20-1003-10

A Inside diameter (old 30.0 mm, new 32.5 mm)

Service Information: Special tool modification

Drift

352 589 08 15 00