si3530s0001a

Service Information: Rear axle shafts

Tip si · temă 35.30 · versiune 0200 · 2007-05-02

Valabil pentru: MODEL 639.### ## up to 014629

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 35 Punte spate › 35.30 Impuls, arbore de antrenare — Seria 639

EinPAS 17 Grup motopropulsor/Punte › 17.51 Punte spate › 17.51.51 Arbore punte/Arbore de antrenare — Seria 639

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 639

SI35.30-S-0001A

Service Information: Rear axle shafts

25.4.07

MODEL 639.### ## up to 014629

Modification notes

20.4.07

Contents updated (replace rear wheel bearings with wheel hub instead of semi-trailing arm)

The rear wheel bearing with wheel hub must be replaced when replacing a rear axle shaft on the above-mentioned vehicles. The replacement of the semi-trailing arms is no longer required.

Before the rear axle shaft is replaced, please check in the history of the vehicle as to whether the semi-trailing arm has been replaced.

In the case that the semi-trailing arm has been replaced, please check whether the part number of the semi-trailing arm installed matches the following part number (A 639 350 30/31 05). If the two part numbers do not match, the rear wheel bearing with wheel hub must be replaced.

Remove/install wheel bearing

AR35.20-S-0302S

Remove/install rear axle shaft

AR35.30-S-0620S

Parts ordering notes

Part no.

Designation

Quantity

A 639 356 04 01

Wheel hub

As required

A 639 981 04 27

Wheel bearing

As required

Documente menționate