si3035w0003a

Service information: Remove/install Mercedes PowerShift 2 fleet in aftermarket

Tip si · temă 30.35 · versiune 0100 · 2009-06-25

Valabil pentru: MODEL 930, 932, 933, 934 with CODE (GE7) Mercedes PowerShift 2 MODEL 930, 932, 933, 934 with CODE (GE8) Mercedes PowerShift 2 - fleet series

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 30 Reglare, instalaţie de reglare viteză › 30.35 Reglare motor autovehicul (FMR) — Seria 930 · Seria 932 · Seria 933 · Seria 934

EinPAS 15 Motor › 15.45 Management motor › 15.45.3 Montare ulterioară/Modificare — Seria 930 · Seria 932 · Seria 933 · Seria 934

EinPAS 17 Grup motopropulsor/Punte › 17.35 Cuplare/Comandă trepte de viteză › 17.35.3 Montare ulterioară/Modificare — Seria 930 · Seria 932 · Seria 933 · Seria 934

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 930 · Seria 932 · Seria 933 · Seria 934

SI30.35-W-0003A

Service information: Remove/install Mercedes PowerShift 2 fleet in aftermarket

24.6.09

MODEL 930, 932, 933, 934 with CODE (GE7) Mercedes PowerShift 2

MODEL 930, 932, 933, 934 with CODE (GE8) Mercedes PowerShift 2 - fleet series

Since the start of production of the third generation of Actros, the code (GE8) Mercedes PowerShift 2 - fleet series is available as special equipment ex (point of origin) in combination with code (GE7) Mercedes PowerShift 2.

To ensure that the code (GE8) Mercedes PowerShift 2 - fleet series can be removed in the aftermarket if a customer so wishes, the removal instructions AN30.35-W-0001A "Remove Mercedes PowerShift 2 fleet series in aftermarket" have been compiled.

The retrofitting of the code (GE8) Mercedes PowerShift 2 - fleet series is described in the installation instructions

AN30.35-W-0002A "Retrofit Mercedes PowerShift 2 fleet series " .

When ordering the required parts kits, the vehicle's data card is automatically updated in VeDoc.

This serves to ensure that when a drive control (FR) control unit is replaced, the correct parameters are copied during the online parameterization.

Remove Mercedes PowerShift 2 fleet series in aftermarket

Vehicles with CODE (GE8) Mercedes PowerShift 2 - fleet series.

AN30.35-W-0001A

Retrofit Mercedes PowerShift 2 fleet series

Vehicles with code (GE7) Mercedes PowerShift 2

AN30.35-W-0002A

Documente menționate