si1840w0001a

Service Information on oil dipstick

Tip si · temă 18.40 · versiune 0100 · 2006-11-06

Valabil pentru: ENGINE 356.9, 364.9, 366.9, 401.9, 402.9, 403.9, 421.9, 422.9, 423.9, 440.9, 441.9, 442.9, 443.9, 444.9, 445.9, 446.9, 457.9, 541.9, 542.9, 900.9, 902.9, 904.9, 906.9, 924.9, 926.9

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 18 Ungere motor, răcirea uleiului motor › 18.40 Senzor nivel ulei, senzor presiune ulei — Seria 364 (modele 9**) · Seria 440 (modele 9**) · Seria 441 (modele 9**) · Seria 442 (modele 9**) · Seria 443 (modele 9**) · Seria 444 (modele 9**) · Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 9**) · Seria 906 (modele 9**)

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.43 Baie de ulei/Ştuţ de umplere — Seria 364 (modele 9**) · Seria 440 (modele 9**) · Seria 441 (modele 9**) · Seria 442 (modele 9**) · Seria 443 (modele 9**) · Seria 444 (modele 9**) · Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 9**) · Seria 906 (modele 9**)

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 364 (modele 9**) · Seria 440 (modele 9**) · Seria 441 (modele 9**) · Seria 442 (modele 9**) · Seria 443 (modele 9**) · Seria 444 (modele 9**) · Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 9**) · Seria 906 (modele 9**)

Valabil și pentru motoare/cutii de viteze: 356 9**, 366 9**, 401 9**, 402 9**, 403 9**, 421 9**, 422 9**, 423 9**, 445 9**, 446 9**, 457 9**, 541 9**, 542 9**, 924 9**, 926 9**

SI18.40-W-0001A

Service Information on oil dipstick

31.10.06

ENGINE 356.9, 364.9, 366.9, 401.9, 402.9, 403.9, 421.9, 422.9, 423.9, 440.9, 441.9, 442.9, 443.9, 444.9, 445.9, 446.9, 457.9, 541.9, 542.9, 900.9, 902.9, 904.9, 906.9, 924.9, 926.9

We would like to point out that with immediate effect only two standardized oil dipsticks for commercial vehicle engines are delivered via the Global Logistics Center Germersheim.

These standardized oil dipsticks must be cut to length and the markings applied for the maximum and minimum oil level.

The exact procedure and the dimensions required in each case can be obtained from the following general information.

As previously the oil dipstick is ordered with the part number determined in the EPC, the Global Logistics Center Germersheim then supplies the corresponding standardized oil dipstick.

Notes on oil dipstick

AH18.40-N-0001-01A

Documente menționate