si1325t0001ba

Service Information: Belt tensioner

Tip si · temă 13.25 · versiune 0100 · 2005-07-12

Valabil pentru: ENGINE 457.944 in MODELS NMB613.358 /388 with REAR AXLE 746.217

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 13 Compresor aer, transmisie prin curea › 13.25 Dispozitiv de întindere a curelei — Seria 613 (modele 358, 388)

EinPAS 15 Motor › 15.18 Antrenare curea › 15.18.30 Curea/Fulie de curea/Dispozitiv de întindere/Rolă de ghidare — Seria 613 (modele 358, 388)

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 613 (modele 358, 388)

Valabil și pentru motoare/cutii de viteze: 457 944, 746 217

SI13.25-T-0001BA

Service Information: Belt tensioner

17.11.04

ENGINE 457.944 in MODELS NMB613.358 /388 with REAR AXLE 746.217

The use of rear axle 746.217 required design modifications to be made to the engine installation position. This led to a change in the routing diagram of the V-belts. In individual cases there may be undesirable contact of the poly-V-belt tensioning device and the belt pulley of the alternator 1. As a consequence, it is necessary to check the distance between the poly-V-belt tensioning device and the belt pulley of the alternator 1 during each maintenance.

If the distance is less than 1 mm, then the poly-V-belt tensioning device must be replaced to avoid damage to the belt drive and alternator 1.

Inspect condition of V-belt, re-tension

AP13.20-T-1350BA

Documente menționate