gf8370p400201a

Stationary heater/heater booster control module, location

Tip gf · temă 83.70 · versiune 0105 · 2011-10-24

Valabil pentru: MODEL 210 with CODE (228) Stationary heater MODEL 210 up to 31.8.96 with ENGINE 602.982 with heater booster MODEL 463 as of 1.6.94 up to 31.5.12 with CODE (H12) Auxiliary heater Webasto Tele Thermo Top S

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 83 Climatizare › 83.70 Încălzire staţionară, încălzire suplimentară, încălzitor auxiliar — Seria 210 · Seria 463 · Seria 602 (modele 982)

EinPAS 39 Încălzire/Aerisire/Răcire › 39.25 Încălzire staţionară/Încălzire suplimentară › 39.25.11 Calculator/Releu — Seria 210 · Seria 463 · Seria 602 (modele 982)

GF83.70-P-4002-01A

Stationary heater/heater booster control module, location

Model 210 with stationary heater/ model 210 up to 31.08.96 with engine 602.982 with heater booster/model 463 as of 01.06.94 with stationary heater

Stationary heater/heater booster control module, location

P83.70-0255-11

The control module (A6n1) is an integral part of the heater. It forms an inseparable unit with the heat exchanger (1).

The control module/heat exchanger unit is bolted to the burner housing (2).

The control module is connected to the power supply and all electrical components on the stationary heater or heater booster by the multi-point connector.

The figure shows the stationary heater. The heater booster in model 210 up to 31 September 96 with engine 602.982 is identical in terms of design, however, did not have its own coolant circulation pump.