gf1840b1200a

Location/task of the oil pressure sensor

Tip gf · temă 18.40 · versiune 0100 · 2016-02-12

Valabil pentru: ENGINE 904.9, 924.9 in MODEL 368.0/1 ENGINE 906.9 in MODEL 368.0/1, 382.1ENGINE 926.9 in MODEL 368.0/1, 382.1, 634.001

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 18 Ungere motor, răcirea uleiului motor › 18.40 Senzor nivel ulei, senzor presiune ulei — Seria 368 (modele 002, 004, 006, 052, 054, 100, 104, 106, 112, 115, 117, 150, 154, 185, 187) · Seria 382 (modele 111, 123, 171, 175, 176, 177, 184, 185, 186, 188, 189) · Seria 634 (modele 001) · Seria 904 · Seria 906

EinPAS 15 Motor › 15.20 Sistem ungere motor › 15.20.12 Senzor/Comutator/Cablaj — Seria 368 (modele 002, 004, 006, 052, 054, 100, 104, 106, 112, 115, 117, 150, 154, 185, 187) · Seria 382 (modele 111, 123, 171, 175, 176, 177, 184, 185, 186, 188, 189) · Seria 634 (modele 001) · Seria 904 · Seria 906

Valabil și pentru motoare/cutii de viteze: 924 ***, 926 ***

GF18.40-B-1200A

Location/task of the oil pressure sensor

12.02.16

ENGINE 904.9, 924.9 in MODEL 368.0/1

ENGINE 906.9 in MODEL 368.0/1, 382.1

ENGINE 926.9 in MODEL 368.0/1, 382.1, 634.001

Location/task of the oil pressure sensor

B18.40-0007-11

Represented on engine 926.9

10B16 Oil pressure sensor

Arrangement of the oil pressure sensor

The engine oil pressure sensor (10B16) is located in the oil gallery, at engine block right side, below the oil cooler.

Function of the oil pressure sensor

The oil pressure sensor (10B16) records the engine oil pressure.

Operation of the oil pressure sensor

The engine oil pressure is recorded by the oil pressure sensor (10B16) which changes its output tension according to oil pressure. The sensor is supplied with 5 V tension, in case the engine oil pressure is below 6 bar (0.6 MPa), the sensor output tension will fall below 90% (4.5 V), the pressure will be normal when above 4.5 V, up to the 95% limit of the 5 V supply tension. The oil pressure sensor (10B16) is connected to the engine control module MR/PLD. The measuring value remains available through the engine CAN4 line to the vehicle control module FR, and through the vehicle CAN1 line to the other electronic systems.