Intermediate piece from charge air housing to turbocharger altered

Tip bt · temă 09.41 · versiune 0101 · 2009-02-16

Valabil pentru: ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954 ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954 ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001 ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 09 Aspiraţie aer, supraalimentare › 09.41 Conductă aer supraalimentare/răcire aer supraalimentare — Seria 000 (modele 001) · Seria 942 (modele 9**) · Seria 950 · Seria 952 · Seria 953 · Seria 954

EinPAS 15 Motor › 15.30 Aspirare aer/Supraalimentare › 15.30.33 Conductă de aspirație/Conductă aer supraalimentare — Seria 000 (modele 001) · Seria 942 (modele 9**) · Seria 950 · Seria 952 · Seria 953 · Seria 954

Valabil și pentru motoare/cutii de viteze: 541 9**, 542 9**, 941 9**

BT09.41-W-0002-01A

Intermediate piece from charge air housing to turbocharger altered



ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954

ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954

ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001

ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

Intermediate piece from charge air housing to turbocharger altered

W09.40-1078-11

Material and form of the intermediate piece altered

The intermediate piece (1) (rubber wrapped) was altered to be an intermediate piece (2) made out of die-casting (GD-AlSi) or permanent mold casting (GK-AlSi). Two sealing rings (3) were also mounted in the altered intermediate piece (2).

Sealing of the oil pressure line from the turbocharger to the charge air housing has been improved by this alteration.

 If wear occurs on intermediate piece (1) then it will be replaced by intermediate piece (2) with sealing rings (3).